Publicité
Les langues disponibles
Les langues disponibles
Shelves
All the units come standard with wire shelves. Each unit has
different number of shelves. Refer to Table 3 for more
information.
Maximum shelf capacity is 45 kg (100 lbs) for full shelves and
22.5 kg (50 lbs) for half shelves.
For safe shipping, the shelves are packaged and secured
inside the cabinet. Insert the shelf support hangers (included
with the manual inside the unit) into the built-in shelf supports
(located on the inside walls of the cabinet interior) at the
desired locations.
Figure 2. Shelf Arrangement
Figure 3. Shelf Clip
Installation Instructions
WARNING: Do not move this unit while it is
loaded.
1. Determine appropriate location for shelves clips, the
reference number on the pilaster can serve as a guide to
ensure all clips are properly located.
General Purpose and Chromatography Refrigerators
2. Insert top of the clip into the desired hole of the pilaster.
Ensure that the retaining tab should be facing upwards.
3. Rotate the clip downwards and insert the bottom tab into
the appropriate hole, the clip may be squeezed slightly
during installation.
4. Install shelves onto clips with the product retention bar
facing upwards, be careful not to dislodge clips during
shelf installation.
5. Prior to loading the shelf, ensure that the shelf is resting
on each of 4 clips and the clips are installed.
CAUTION: Improper shelf clip installation may
cause shelf and/or product damage to the unit.
CAUTION: Do not overload the shelves, the unit
is designed to utilize all shelves that are supplied
in an equally spaced manner.
Door Operation
The swinging door units are designed to stay open if opened
90 degrees or more. The spring tension cannot be adjusted.
The Sliding doors can be opened completely towards left or
right. If the self-closing door does not work properly, make
sure the unit is leveled properly.
Door Seal
CAUTION: Door seal integrity is critical for unit
performance. A loose fitting gasket allows moist
air to be drawn into the cabinet, resulting in
quicker frost buildup on the cabinet walls, longer
running time, poor temperature maintenance and
increased operation cost.
Installation |
13
Publicité
