REMOVING THE INTERIOR PARTS
Cool pack
Pull the cool pack up through the guide
Cool pack
No lamp for ZR20* model.
PROPER STORAGE OF FOOD
ITEMS
There is load limit along with the upper side of cap
frame inner step . Please do not stack food items
up above the load limit level.
CLEANING THE FREEZER
Do not use Benzene, Thinner or Clorox™
for cleaning.
WARNING
They may damage the surface of the
appliance and can create a risk of fire.
Do not spray the freezer with water
while it is plugged in, as it may cause an
CAUTION
electric shock. Do not clean the freezer
with benzene, thinner or car detergent for
risk of fire.
1. Unplug the power cord of the freezer.
2. Slightly dampen a soft lint-free cloth or paper
towel with water.
Do not use any kind of detergent to clean
the freezer because that can discolor or
damage the freezer.
3. Wipe the inside and outside of freezer until it is
clean and dry.
4. Plug the power cord of the freezer.
REPLACING THE LAMP
When the interior lamp has gone out, disassemble
the lamp cover and lamp by yourself.
Pull the power plug out of the socket
before changing the interior light of the
WARNING
freezer.
- Otherwise, there is a risk of electric
shock.
1. Use a screwdriver to remove the shade.
2. Remove the lamp cover, remove the lamp.
Please contact your service agents before
replace the lamp.
No lamp for ZR20* model.
English - 14