Philips GoPure GP5212 Manuel D'utilisation page 7

0
m Important
When using Philips GoPure
car air purifier
• Keep your car ventilation in
low speed.
• Keep car windows closed.
m Warning
For your safety, do not try
to switch off or operate the
device manually while driving.
Always park your car first!
5 Philips GoPure car air purifier-How filter works
Philips GoPure Car air purifier
is composed of a
multi-layer filtration system
that guarantees the most
effective air-purification. All
filter layers are assembled in
one single
simple-to-replace filter.
m Important
Philips GoPure car air purifier
indicates automatically when
you must change
the filters.
4 Using GoPure car air purifier functions
When the vehicle power supply is on, the device starts
automatically in silent mode.
1 To turn on the device, touch the power
button, the device will start running in silent
mode with emitting a sound.
2 Touch the power button to switch the
speed mode in sequence of boost and
silent. The power button will emit a sound
while being pressed.
3 To turn off the device, hold down the
2s
power button for 2s until it emits a sound.
4 After the device is turned on, if the filter
replacement indicator flash 30 seconds
then showing a constant light, the filter
need to be replaced.
When the filter needs to
be replaced, the Filter
replacement indicator flash
30 seconds then showing a
constant light each time the
device is turned on.
Replace the filter immediately
using only genuine Philips
GoPure SelectFilter Plus. It
helps maintain the maximal
performance of your GoPure
Car air purifier and helps to
provide the purest air quality
inside your car.
7
1 Disconnect GoPure car air
purifier device.
2 Push the front side of
cover. take off top cover.