Electrolux EOC69611 Notice D'utilisation page 22

22 electrolux
nect the appliance from the mains at all
poles. The isolation device must have a
contact opening width of minimum 3
mm.
• You must have correct isolation devices:
line protecting cut-outs, fuses (screw
type fuses removed from the holder),
earth leakage trips and contactors.
• The shock protection parts must be fixed
in such a way that they cannot be un-
done without tools.
• Some parts of the appliance carry cur-
rent. Close the appliance with furniture
and make sure that there are no free
spaces. It prevents electrical shock be-
cause you cannot accidentally touch
dangerous parts.
• Before the installation, make sure that the
kitchen cabinet has the recess dimen-
sions applicable.
• Make sure that the appliance is installed
below and adjacent safe structures.
• Keep the minimum distances to the other
appliances and units.
• Install the appliance with its back and
one side close to the higher appliance.
The other side must be close to appli-
ance with the same height.
• The appliance cannot be positioned on a
base.
• Built in ovens and built in cooking surfa-
ces are attached with special connection
system. To prevent damage to the appli-
ance, only use an appliance with the ap-
pliances from the same manufacturer.
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical data on the
rating plate agree with your domestic
power supply.
• Information on the voltage is on the rating
plate.
• Always use a correctly installed shock-
proof socket.
• When you connect electrical appliances
to mains sockets, do not let cables touch
or come near the hot appliance door.
• Do not use multi-way plugs, connectors
and extension cables. There is the risk of
fire.
• Do not replace or change the mains ca-
ble. Contact the service centre.
All manuals and user guides at all-guides.com
• Make sure not to squash or cause dam-
• Make sure that the mains connection is
• Do not pull the mains cable to disconnect
Use
• The appliance is only for domestic use.
• Only use the appliance for domestic
• Do not use the appliance as a work sur-
• Do not put flammable products or items
• The interior of the appliance becomes hot
• Be careful when you remove or install the
• Always stay away from the appliance
• Discoloration of the enamel has no effect
• To prevent damage or discoloration to
• Do not use this appliance if it is in contact
• Do not apply pressure on the open door.
age to the mains plug (if applicable) and
cable behind the appliance.
accessible after the installation.
the appliance. Always pull the mains plug
– if applicable.
Do not use the appliance for commercial
and industrial use.
cooking tasks. This is to prevent physical
injury to persons or prevent damage to
property.
face or storage surface.
that are wet with flammable products,
and/or fusible objects (made of plastic or
aluminium) in, near or on the appliance.
There is the risk of explosion or fire.
during use. There is the risk of burns.
Use gloves when you insert or remove
the accessories or pots.
accessories to prevent damage to the
oven enamel.
when you open the door while the appli-
ance is in operation. Hot steam can re-
lease. There is the risk of skin burns.
on the performance of the appliance so it
is not a defect in the sense of the warran-
ty law.
the enamel:
– do not put any objects directly on the
appliance floor and do not cover it with
aluminium foil;
– do not put hot water directly into the
appliance;
– do not keep moist dishes and food in
the appliance after you finish the cook-
ing.
with water. Do not operate the appliance
with wet hands.