Cleaning And Maintenance; Safety Advice; Cleaning; Safety Instructions For Maintenance - Bartscher A100155 Mode D'emploi

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

•
Always wash the device when finished using it.
•
Wash the ceramic insert and glass lid in warm water with a mild cleaning agent.
Rinse and dry thoroughly.
•
If food has stuck to the bottom of the ceramic insert, fill it with warm water and
leave for a few hours to soak, after which it will be easier to clean.
•
Wipe the interior and exterior of the outer pot with a soft, moist cloth.
•
Always use soft cloths, never use harsh cleaners that could scratch the device.
•
After cleaning, dry and polish the surface of the device with a dry cloth.

6.3 Safety instructions for maintenance

o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
- 27 -