dirna Bergstrom Bycool Green Série Instructions De Montage page 12

EN INTEGRAL POWER
Connect the other end in (+) position with the
8
engine running.
Connect wiring to inner air distribution panel
9
(Point C page 12) and fasten it with screws
provided.
Important: Before installing the inner air
!
distribution panel, set the switch to the correct
position for each vehicle.
Connect the upper power cable in the rear of
10
the unit.
Connect the lower power cable (A) to the
11
battery and place cable joint hazard stickers in
a visible place (B).
Important: When connecting the cables, leave
!
suitable distance in order to prevent breakage
when the vehicle moves.
Important: Given the complex electronic
!
regulation system in the unit, the current
connection must be made directly to the
vehicle's battery (if this is not possible, contact
dirna Bergstrom, s.l.).
Important:
!
(220AA21001) before starting up.
Check the user
!
10
B
11
manual
12
®
A