DeWalt XR LI-ION DCD732 Traduction De La Notice D'instructions Originale page 246

ENGLISH
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE
Unit will not Battery not
start. installed
correctly.
Battery is not
charged.
Battery or
power tool is
overheated.
Switch is
damaged.
48
POSSIBLE SOLUTION
Install battery in tool handle and ensure it is seated correctly.
Place battery on charger and install a fully charged battery pack in
tool.
Allow battery and/or tool to cool after extended use or replace
overheated battery pack with a cool one.
Have switch replaced by an authorised D WALT repair agent.
E