MEGAMO KANSAS Manuel page 37

USE AND OPTIONS OF THE TYPE-2 DISPLAY
ON/OFF
⏻
UP/DOWN
+ / -
MENU
MEGAMO USER MANUAL | KANSAS
- On/Off (Press and hold 1").
- If a power-on password has been set on the display, you must enter
the correct password when switching on the display..
- The display will automatically switch off when no operation is
performed for 5 minutes (You can change the time manually).
- Increase or decrease assistance (Press once).
- Walk mode 6Km/h: Press and hold Down/- 2"
- Headlight: Press and hold Up/+ for 1"
- Reset mileage counter: Press Up/+ and Down/- at the same time.
- Press the ⏻ button twice in a row to access the settings.
- Press again twice in a row to exit the menu.
Display brightness: Adjust by pressing Up/+ or Down/-.
System settings:
Units: select metric or imperial.
Power system: This option should only be modified by an official
MEGAMO point of sale.
Power indicator: Displays power data in percentage or voltage.
Auto assist: Enable or disable automatic assistance.
Auto Power Off Time: Select a value from 1-9 minutes for automatic
display shutdown.
Wheel diameter: This option should only be modified by an official
MEGAMO point of sale.
Ajustes avanzados: This option should only be modified by an
official MEGAMO point of sale.
Reset to factory settings: This option should only be
modified by an official MEGAMO point of sale.
Password settings: Enter the default password "0000" to reset the access
password. You can also disable this function.
Exit: Select to return to the main menu.
37