DRYER DISPOSAL
INSTALLATION REQUIREMENTS
Tools and Parts:
Gather required tools and parts before starting installation.
Flat-blade screwdriver
6,2 mm (1/4") nut driver
Utility knife
Pliers
#2 Phillips screwdriver
Adjustable wrench that opens
to 25 mm (1") or hex-head
socket wrench (for adjusting
dryer feet)
Tape measure
Vent clamps
Wire stripper
(direct wire installations)
Putty knife
Caulking gun and
compound (for installing
new exhaust vent)
Tools needed for Gas installations:
204 mm (8") or 254 mm (10")
pipe wrench
Tin snips
(new vent installations)
Level
Pipe joint compound
resistant to LP gas
5