Sylvania SDVD1035BT Mode D'emploi page 19

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SETUP
Press the SETUP Button on the remote control or on the unit, the setting menu will appear on screen as below.
,
,
Using the Direction
Button to enter or confirm the selection. After setting, press the SETUP button to save the settings and exit.
In General Setup Page:
1.
If TV Shape is selected, using the Direction and OK Button to set the aspect ratio to match the
connected TV.
2.
If Angle Mark is selected, using the Direction and OK buttons to set it
multi-angles are available in the playing DVD,
3.
If
OSD Lang (On Screen Display Language) is selected, using the
OSD language as desired.
4.
If Screen Saver is selected, using the Direction and
screen saver will come on when the unit stops
5.
If Last Memory is selected, using the Direction and OK Buttons to set it On or Off. If set to On, the unit
will start playback from the position where the disc was stopped last time.
6.
When Text To Speech is selected to ON, the player will have a voice during pressing each button, the
default is OFF.
In Spea k er Setup Page:
If Downmix is selected, using the Direction and OK Buttons
1. If set to Lt/Rt, the rear left or rear right channels will play on both Left and Right Speakers.
2. If set to Stereo, the rear left channel will play on Left Speaker; the rear right channel will play on Right
Speaker.
If Dolby Digital is selected, using the Direction and OK Buttons to set the Dual Mono and Dynamic.
1. If Dual Mono is selected, use the Direction and OK Buttons to set it to Stereo, L-Mono (Play Left channel
on all speakers), R-Mono (Play Right channel on all speakers) or Mix-Mono (Mixed Right and Left channel
and plays on all speakers) as desired. (Functions depend on the recording of the disc).
2. If Dynamic is selected, use the Direction and OK Buttons to set the dynamic level as desired or turn it off.
,
Buttons to highlight the function needed to set or reset. Press the OK
- - General Setup Page - -
TV Display
Wide
Angle Mark
On
OSD Lang
Eng
Screen Saver
On
Last Memory
On
On
Text To Speech
Go To General Setup Page
the multi-angle logo will appear on the screen.
OK
or the image is paused for approximately five minutes.
19
On or Off. If set to On, when
Direction and
OK
Buttons to set
it On or
Off. If set to On, the
to
set it
to Lt/Rt; Stereo.
数字签名
人 lxy
日期:
2017.09.3
0 08:41:45
+08'00'
Buttons to set the

Publicité

Table des Matières
loading

Table des Matières