Publicité
Les langues disponibles
Les langues disponibles
which TV to control. When you are done, highlight
OK and press OK.
• Examples about the use of the feature will be
displayed on the next screen. Press OK to finish
the setup.
If you carried out the setup after the first time instal-
lation you will return to the first screen of the setup
wizard when you press OK. In that case press Exit
or highlight Setup Later and press OK in order to
exit the setup.
Once the setup is complete, you will be able to control
the functions of your TV with Alexa.
Note: Make sure that the devices are connected to the internet.
Interacting with Alexa
To activate Alexa and make it listen what you are
saying, just say "Alexa". You can also press and hold
the Prime Video button on the remote for about 3
seconds to do that. When Alexa is activated its logo
will appear on the lower right corner of the TV screen.
You can press the Exit button on your TV remote to
end the Alexa's response to your request.
Press and hold the Language button on the remote
for about 3 seconds to turn off the microphones. Press
and hold the button again to turn on the microphones.
Standby Mode LED Status
The embedded microphone will affect the Standby
Mode LED status of your TV as follows:
Microphone
TV Power State
State
Off Mode /
Off
Standby Mode
On Mode
On
On Mode
Off
Off Mode /
On
Standby Mode
Example Commands
Here are some voice commands that you can use to
control the functions of your TV with Alexa:
Command
Alexa, turn on 'FN'
Alexa, turn off 'FN'
Alexa, play 'FN'
Alexa, pause 'FN'
Alexa, resume 'FN'
Alexa, stop 'FN'
Alexa, fast forward on 'FN'
Alexa, rewind on 'FN'
Standby Mode
LED Status
Red
Not lit
Red
Not lit
Function
Powers on the TV
Powers off the TV
Starts media playback
Pauses media playback
Resumes media playback
Stops media playback
Advances media in fast
forward mode
Rewinds media
English - 38 -
Command
Alexa, set the volume of
'FN' to 50
Alexa, turn the volume up
on 'FN'
Alexa, turn the volume
down on 'FN'
Alexa, mute 'FN'
Alexa, unmute 'FN'
Alexa, change the input to
"input_name" on 'FN'
Alexa, change channel to
"channel_number" on 'FN'
Alexa, change channel to
"channel_name" on 'FN'
Alexa, channel up on 'FN'
Alexa, channel down
on 'FN'
Alexa, next channel on
'FN'
FN is the abbreviation for 'Friendly Name'.
Google Assistant
Your TV works with Hey Google for voice control of
your connected devices and appliances.
Works With Hey Google
By means of this feature you can control the functions
of your TV with Google Assistant devices. In order to do
this, the setup process should be completed.
Before the setup
Complete the following procedures before you start
the setup on your TV.
• Install the Google Home application on your mobile
phone and login to your account
• Add the assistant device to your account
• Select the Vsmart TV action from the list of actions
within the application
• A screen will be displayed where you will enter the
authentication code which will be created during the
setup process on your TV in order to link your TV to
your account. Continue with the setup on your TV to
get the authentication code
Setup process
The setup can be carried out by using the Google
Assistant option in the Settings>System>Voice
Function
Sets the volume to the
speci ed level
Increases volume by 10
units
Decreases volume by
10 units
Mutes sound
Unmutes sound
The TV switches to the
input source with the spec-
i ed name (e.g. HDMI 1)
The TV switches to the
channel with the speci ed
number (e.g. channel 200)
The TV switches to the
channel with the speci ed
name
The TV switches to the
next higher channel, if any
available
The TV switches to the
next lower channel, if any
available
The TV switches to the
next channel on the
channel list
Publicité
