Gas Component Connection Checks - Real Flame Restoration Hardware 26100238 Manuel Du Propriétaire

All manuals and user guides at all-guides.com

Gas Component Connection Checks

If the burner will not light or stay lit, please perform the following checks.
ke sure the electrode wire is correctly connected.
Both electrode wires must be fully inserted into the igniter box.
ke sure that the igniter box is unobstructed.
Clear any debris on top of the igniter box and make sure there is no debris
between the igniter pin, thermocouple and the burner tube.
Igniter Box
Burner
Tube
Do not block
opening
CORRECT INCORRECT
16