Télécharger Imprimer la page

Lindy 38139 Manuel Utilisateur page 4

Publicité

Les langues disponibles

Les langues disponibles

User Manual
Introduction
Thank you for purchasing the LINDY C6 HDMI Extender with HDBaseT
uncompressed HDMI signal transmission for resolutions up to Ultra HD 4K 60Hz, making it ideal for use
in Home Cinema, Professional AV and Digital Signage applications. In addition to extending HDMI signals
the Extender also supports the extension of bi-directional IR signals, allowing you to control connected AV
equipment such as a source or display from either end of the installation.
For added convenience the Extender also supports Power-over-HDBaseT (PoH) which allows the
Transmitter and Receiver units to be powered from a single power supply, giving greater flexibility and
making the Extender ideal for discreet and retrofit installations.
Please Note: The quoted lengths and resolutions are possible with a direct connection between
Transmitter and Receiver using good quality Cat.6 solid core cable. Using a different cable type, or
introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
Package Contents
HDMI Extender C6 for HDMI (1 x Transmitter, 1 x Receiver)
Multi-Country Power Adapter (24V DC/1A) x 1
IR Extender Cable 1.4m x 4 (2 x Emitter, 2 x Receiver)
Mounting Brackets with screws x 4
This User Manual
Features
Extends HDMI & IR signals up to 70m via its HDBaseT connection
Supports resolutions up to Ultra HD 4K 60Hz including Full HD 1080p 3D
Power over HDBaseT allows a single power supply to power the Transmitter and Receiver
Bi-directional IR control of AV display and source equipment
Suitable for use with 3D/HDTV Home Theatre, professional HDTV installations, Computer Systems,
Multimedia and Control Centre system installations.
Specification
Maximum cable length for the HDBaseT connection: 70m (approx.)
Supports resolutions up to:
Full HD 1080p 60Hz (4:4:4 up to 16bpc) including 3D up to 70m
Ultra HD 4K 60Hz (4:2:0 12bpc) / 4K 24/30Hz (4:4:4 8bpc) up to 40m
Support for HDCP 2.2/1.4, CEC and Lip Sync pass-through
Audio Pass-through: LPCM 7.1 audio, Dolby® TrueHD, Dolby Digital® Plus, and DTS-HD Master
Audio™
IR Extension cables (included) can be attached to allow the bi-directional control of IR (30 – 60kHz)
equipment via the extender
Maximum HDMI Cable length, 2m in/out
Power over HDBaseT (PoH)
Dimensions: 100 x 65 x 25mm (L x W x H) ; Weight: ~0.200 kg (each unit)
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
English
TM
Technology. It supports

Publicité

loading