HBM Machines 10535 Manuel D'instructions page 37

Switch off the engine and pull out the mains plug when leaving the workplace.
All protection and safety equipment must be reassembled immediately after repair or
maintenance work is completed.
The safety, operating and maintenance information of the manufacturer, as well as the
dimensions specified in the technical data, must be observed.
The applicable accident prevention regulations and the other generally accepted safety
rules must be observed.
Do not use low-output machines for heavy work.
Do not use the cable for purposes for which it is not intended!
Make sure that you have secure footing and always maintain your balance
Check whether the moving parts function faultlessly and do not jam or whether parts are damaged. All
parts must be correctly mounted and all conditions must be fulfilled to ensure fault-free operation of the
tool.
Damaged protective devices and parts must be re- paired properly or replaced by a recognised spe
cialist workshop unless otherwise specified in the usage instructions.
Have damaged switches replaced by a customer service workshop.
This tool conforms to the applicable safety regulations. Repairs may only be performed by an electrician
using original spare parts. Otherwise, accidents can occur.
If necessary, wear suitable personal protective equipment. This could include:
Hearing protection to avoid the risk of becoming hearing impaired;
Respiratory protection to avoid the risk of inhaling harmful dust.
The operator must be informed about the conditions that influence the noise generation.
Errors in the machine must be reported to the per- son responsible for safety as soon as they are dis-
covered.
This device is not designed to collect dangerous dust.
This device is not designed to be operated by per- sons (including children) with impaired physical,
sensory or mental capabilities, or who have insufficient experience and/or insufficient knowledge un- less
they are being supervised by a person who is responsible for their safety or they are receiving in-
struction about how this device is to be used. Children should not be left unattended, to ensure they do
not play with the device.
WARNING Operators shall be adequately instructed on the use of these machines.
WARNING This machine is not suitable for picking up hazardous dust.
WARNING This machine is for dry use only.
CAUTION This machine is for indoor use only.
CAUTION This machine shall be stored indoors only.
WARNING Do not allow the supply cord to come into contact with the rotating brushes.
Warning! This electric tool generates an electromagnetic field during operation. This field can impair ac-
tive or passive medical implants under certain conditions. In order to prevent the risk of serious or deadly
injuries, we recommend that persons with medical implants consult with their physician and the
manufacturer of the medical implant prior to operating the electric tool.