Explanation Of The Symbols On The Device - HBM Machines 10535 Manuel D'instructions

CAUTION： Read the instruction
manual before using the machine.
We hope the new tool brings you much enjoyment and success.

Explanation of the symbols on the device

Symbols are used in this manual to draw your attention to potential hazards. The safety
symbols and the accompanying explanations must be fully understood. The warnings
themselves will not rectify a hazard and cannot replace proper ac- cident prevention
measures.
m Attention!
Note:
In accordance with the applicable product liability laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the device arising from:
Improper handling
Failure to comply with the operating instructions.
Repairs carried out by third parties, unauthorised specialists
Installing and replacing non-original spare parts,
Improper use
Failures of the electrical system in the event of the electrical regulations and VDE provisions 0100, DIN
57113 / VDE 0113 not being observed
Note:
Read the whole text of the operating manual before assembly and commissioning.
This operating manual should help you to familiarise yourself with your device and to use it for its
intended purpose.
The operating manual includes important instructions for safe, proper and economic operation of the de-
Before commissioning, read and observe the operating manual and safety instructions!
Wear hearing protection. Excessive noise can result in a loss of hearing.
Wear a dust protection mask. When machining wood and other materials, harmful dust
may be generated. Do not machine material containing asbestos!
We have marked points in these operating instructions that impact your safety with this
symbol