Setting The Operation Mode - Mr. Blacksmith 8968463 Manuel D'utilisation

DOWN button to higher or lower the volume level. Then press ENTER to
confirm the setting.

4. SETTING THE OPERATION MODE

The detector comes with three operating modes of ALL METAL, DISC,
PINPOINT.
a. ALL METAL—Used for detecting all types of metal.
Press SET twice, then ENTER to get ALL METAL. In this mode, the unit can
detect all kinds of metal.
b. DISC — Used for target discrimination. You can set the target range or
eliminate the target you don't want by pressing SET and MODE buttons. Press
SET twice, the blank frame flashes, press UP or DOWN to choose the target
you don't want. Then press MODE. You can choose several targets to be
eliminated. After that press ENTER to confirm the selected target to be
eliminated. To pick up the eliminated items, simply press MODE before
pressing ENTER. Or repress SET twice and UP or DOWN To move the
flashing frame to the target you want to pick. Then press MODE and ENTER.
Note: A crossed frame is for item eliminated.
5. PINPOINT
After you find a metal object, you can use P/P to pinpoint the target. Hold
down P/P button. LCD will display P/P and an icon of eye. Slowly move the
search coil above the sound area. The detector sounds and the depth
indicator on the LCD displays the probable depth of the target. Then release
the button. Sweep the search coil again, keeping the same distance of
search coil, sound disappears. Hold down P/P again, closer the search coil to
the sound area, the detector sounds again. Repeat the above steps until the
detector displays the stronger signal where the location of the target is.
TESTING AND USING THE DETECTOR
To learn how the detector reacts to different metals, you should test it before
you use it the first time. You can test the detector indoors and outdoors.
7