Setting Volume - Mr. Blacksmith 8968463 Manuel D'utilisation

1￠ —
indicates that the target might be a coin of 1￠ or zinc penny or a copper
coin. Some large rough gold items or bronze objects might register within this
category.
SILVER Range
￠
1 --
indicates that the target is probably 1￠ or 10￠ coin. 10￠/25￠
—
/1$
indicates that the target is probably silver coin, 10￠ ,25￠ or 1$.
Some large aluminum coin might register within this category.
--
50￠ indicates that the target is probably 1$,50￠ or a silver coin.
TONES
There are three tones for different kinds of metal type. This makes it easier to
identify the metal being detected.
When the detector finds iron, nail, bottle caps, it sounds a low tone. A
medium tone is tor 5￠,1￠,10￠, some gold rings, aluminum pull tabs, zinc
or copper items. A high tone is for 25￠,50￠,1$or silver items.
OPERATION
1. Press POWER button to turn on the detector. Press POWER again to
power off. LCD displays all symbols.
2. SETTING SENSITIVITY
Press SET, sensitivity level bar flashes. Then press UP button to higher the
sensitivity or press DOWN button to lower it. After that, press ENTER to
confirm the setting.

3. SETTING VOLUME

Press SET three times, the volume icon flashes. Press UP button or
6
.