Axis PT IR Illuminator Kit A Guide D'installation page 9

PT IR Illuminator Kit A Installation Guide
6. Route the illuminator cables along the illuminator bracket using cable ties.
7. Route the illuminator cables through the illuminator cable glands in the bottom cover and screw the caps on
firmly (torque 3 Nm).
Make sure the cables are properly grounded. The shield shall be in full contact with the metal cable gland.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
3
1 Bottom cover
2 Cable gland and
cable gland cap (2x)
3 Illuminator cable (2x)
Page 9