Installation Steps; Package Contents - Axis PT IR Illuminator Kit A Guide D'installation

PT IR Illuminator Kit A Installation Guide
This Installation Guide provides instructions for installing PT IR Illuminator Kit A on AXIS Q87-E Dual PTZ Network
Camera Series.
Note: When installing the PT IR Illuminator Kit A together with the AXIS Q87-E Dual PTZ Network Camera
Series, start with the AXIS Q87-E Dual PTZ Network Camera Series Installation Guide.

Installation Steps

1. Check the package contents against the list below.
2. Hardware overview. See page 6.
3. Install the Illuminators. See page 7.

Package Contents

Item
Illuminators
Brackets
Screw kit
Printed materials
Tools needed (not included)
PT IR Illuminator Kit A
Installation Guide
Models/variants/notes
PT IR Illuminator Kit A:
Crossbar
Illuminator bracket (2x)
Crossbar screw (4x)
Illuminator bracket screw (4x)
Washer (8x)
Lock washer (10x)
Illuminator screw (2x)
Rubber shim (2x)
PT IR Illuminator Kit A Installation Guide (this document)
RJ45 crimp tool
Allen key set
Ratchet set
Loctite 243® threadlocker
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
IR-LED 10° angle
IR-LED 50° angle
Built-in adjustable photocell
Page 5