Memory gauge
The memory gauge lights up when you take a still picture. While the gauge is
lit, the camera is storing the picture on the card.The memory gauge indication
changes as shown below depending on the shooting status.
The indication is not displayed during movie recording.
Shoot
Before shooting
(Gauge is off)
Battery check
En
If the remaining battery power is low, the battery check indication on the
monitor changes as follows while the camera is turned on.
Lit (Green)
(The indicator turns
off after a while.)
Remaining power
level: high.
8 En
All manuals and user guides at all-guides.com
Shoot
One picture
taken
(Lit)
Blinks (Red)
Remaining power level: low.
Prepare new batteries.
Shoot
Wait
Two or more
No more pictures can
taken
be taken (Fully lit).
(Lit)
Wait until the gauge
returns to the status
on the left to take the
next shot.
No indication
Green lamp and orange
lamp on the right of the
viewfinder blink.
Remaining power level:
exhausted.
Replace with a new batteries.