ENGLISH
ENERGY SAVING FUNCTIONS
This monitor is equipped with power management
features according to the EPA and VESA DPMS
standards. When not in use, the power consumption is
reduced in three steps (Standby, Suspend and Off-
Status). While the monitor is in power saving mode, the
Mode
H-Sync
Normal
active
Standby
off
Suspend
active
Off-Status
off
TECHNICAL SPECIFICATIONS
Picture tube
Input signal
Display colors
Synchronization
Pixel clock
Resolution
Misconvergence
Power supply
Power consumption
Dimensions
Weight
Operating environment
PIN ASSIGNMENT
Pin
Assignment
Pin
1
Red
2
Green
10
3
Blue
11
4
Ground
12
5
Ground
13
6
Red return
14
7
Green return
15
8
Blue return
18 - Belinea 10 60 55
All manuals and user guides at all-guides.com
V-Sync
Color of
status indicator
active
green
active
orange
off
orange
off
orange (flashing)
19 inches diagonal size (45.5 cm visible),
0.24 mm dot pitch,
low emissions according to MPR II and TCO 99,
phosphorus type P22
analog 0.7 Vpp / 75 Ohm, positive
Synchronization: separate, TTL level
Horizontal synchronization: positive/negative
Vertical synchronization: positive/negative
Analog input, unlimited colors
30 - 96 kHz horizontal
50 - 160 Hz vertical
200 MHz
max. 1600 × 1200 pixels
center: max. 0.20mm; main area: max. 0.30mm; edge: max. 0.40mm
200 - 240 VAC, 50/60 Hz
max. 120 W (Standby: < 15 W, Off-Status: < 3 W); Power saving functions EPA and
VESA-DPMS certified, Energy Label
470 mm (width) x 466 mm (height) x 466.5 mm (depth); (monitor only)
23.3 kg (monitor only)
Temperature: 0 to 35 °C
Rel. humidity 10 to 90 % (without condensation)
Assignment
9
—
Ground
Ground
SDA
Hor. synch.
Vert. synch.
SCL
status LED (see
in figure 4) is flashing orange. Most
graphic cards and PCs support monitors with power
management features. If you have an older PC or
graphic card that does not support power management
features, please contact your dealer.
Power
consumption (max.)
< 120 watts
< 15 watts
< 15 watts
< 3 watts
15-pin Mini-D-Sub connector
Recovery
time
-
< 3 sec.
< 3 sec.
< 20 sec.