Cleaningand Maintenance; Safety Instructions; Cleaning - Casselin CLVAC Manuel D'instructions

5. CLEANING AND MAINTENANCE

5.1 Safety instructions

Any maintenance, cleaning, repair of the appliance must be done with the appliance unplugged (isolated from
all electrical sources).
The use of caustic detergents and baking soda for cleaning is prohibited. Water must not get inside the
device.
Never immerse the appliance in water or any other liquid.
Use the Casselin brand products provided for this purpose.
WARNING
All operations on the device must be compatible and comply with standards relating to operator safety.
Before any cleaning or maintenance operation, set the lever of the general omnipolar switch (wall) to position
"0" to completely disconnect the dishwasher. Gloves must be worn during maintenance operations.

5.2 Cleaning

PREVENTIVE MAINTENANCE (to be performed daily)
It is essential to clean the inside of the dishwasher:
• Remove the filters from the tank and clean them
• Do not use acidic, corrosive or abrasive products, or steel brushes to clean the device.
• Wait for the appliance surfaces to cool before cleaning the exterior. Use a sponge and non-foaming, non-
acidic and non-abrasive products.
Do not use water jets or steam cleaners for cleaning
• Check that the nozzles on the wash and rinse arms are not clogged; if necessary, unclog them. The wash
and rinse arms can be easily removed without the need for tools, by simply unscrewing the lower and upper
pivots.
• At the end of cleaning, leave the cover open to dry the inside of the appliance and to prevent the formation
of bad odors.
• To guarantee washing hygiene, disinfect the appliance at least once a week using specific disinfectant
products and ending the operation with repeated vacuum rinsing for a few minutes.
In all cleaning operations, NEVER use products which could form foam in the dishwasher.
PERIODIC MAINTENANCE (to be performed every 2 weeks)
• After a certain period of operation, the presence of calcium and magnesium salts in the water causes the
formation of scale which can compromise the correct operation of the dishwasher.
Call qualified personnel for descaling.
• Check that the safety devices work correctly.
NOTICED
In the event of a trip, unplug the appliance, let it cool down and contact your retailer. If the unit does not start,
check your power cord. The device must not be plugged into a power strip but directly into a wall socket. For
any other anomaly, contact your dealer.
NOTICED
Waste from used devices: all used devices must, when disposed of, comply with the regulations in force in
their country*. It is imperative to make the device unusable before disposal by removing the power supply
cable.
* in terms of ecology and recycling
EN