Features; Assembly - RIDGID R7121 Manuel D'utilisation

FEATURES

PRODUCT SPECIFICATIONS
Chuck ...........................................................1/2 in., Keyed
Switch ..........................................Single Speed/Reversible
No Load Speed .................................................... 500/min.
kNOW YOUR DRILL
See Figure 1, page 14.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating functions.
AUXILIARY HANDLE
This drill is equipped with a three-position auxiliary handle
for ease of operation and to prevent loss of control.
EXTERNALLY ACCESSIbLE bRUSHES
Externally accessible brushes extend the life of the ma-
chine.

ASSEMbLY

UNPACkING
When unpacking the drill:
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACkING LIST
1/2 in. Single Speed Reversible Drill
Spade Handle
Auxiliary Handle
Chuck Key
Key Strap
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to
heed this warning could result in serious personal
injury.
Input ............................ 120 Volts, 60 Hz, AC only, 9 Amps
Net Weight .............................................................. 7.4 lbs.
LIGHTED PLUG
The lighted plug helps to easily identify live tools.
LOCk-ON bUTTON
This tool is equipped with a lock-on feature for continuous
drilling.
POWER CORD
This tool has a 12 foot power cord with a built-in cord
wrap.
SINGLE SPEED REVERSIbLE SWITCH
This drill has a single speed rocker-type switch. The switch
is reversible for changing the direction of rotation.
SPADE HANDLE
This drill is equipped with a two-position rear spade handle
for control tailored to the project.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
WARNING:
The tool should never be connected to a power
supply when you are assembling parts, making
adjustments, cleaning, performing maintenance, or
when the tool is not in use. Disconnecting the tool
will prevent accidental starting that could cause
serious injury.
8 - English