Electrical Wiring Diagram - Fanaway Corbelle Instructions D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Fanaway Corbelle Installation Instructions
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit
panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts
supplied with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire
strands or connections.
8.
After connecting the wires, spread them apart so that the green and white wires are on one side
of the outlet box and the black and blue wires are on the other side.
8 | P a g e

ELECTRICAL WIRING DIAGRAM

wire (black) to receiver input wire (black, AC IN
L) as shown in Fig. 11.
wire (white) to the receiver input wire (white, AC
IN N).
the fan bracket ground wire (green) and fan
body ground wire.
(black, TO MOTOR L) to motor live input wire
Fig. 11a
(black, TO MOTOR L).
(white, TO MOTOR N) to motor neutral input
wire (white, TO MOTOR N)
FOR LIGHT) to fan light live input wire (blue,
FOR LIGHT)
security hook, tight the safety cable (Fig.11a &
Fig.11b)
Fig. 11b
1.
Connect the household live supply
2.
Connect the household neutral supply
3.
Connect the household ground wire to
4.
Connect the reveiver output wire
5.
Connect the receiver output wire
6.
Connect the receiver output wire (blue,
7.
Pull the metal safety cable on the
V e r s i o n 1 . 0
I N D U S T R I
0 4 / 2 0 2 1

Publicité

Table des Matières
loading

Table des Matières