Electrical Wiring Diagram - Fanaway Evora Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
Fanaway Evora Installation Instructions
Fig. 6
WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A
LICENSED ELECTRICIAN.
NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED
WIRING.
 Connect "LIVE" supply wire to the "L" of terminal block on the mounting bracket.
 Connect "NEUTRAL" supply wire to the "N" of terminal block on the mounting bracket.
 Connect "EARTH" wire to the "
 Connect the output connector (1) from the receiver to the connector (1) from the fan body.
 Connect the connector (2) from the fan mounting bracket to the input connector (2) from the
receiver.
 Connect the connector (3) from from the infrared detecter to the input connector (3) from receiver.
9 | P a g e

ELECTRICAL WIRING DIAGRAM

" of terminal block on the mouthing bracket.
Fig. 7

Publicité

Table des Matières
loading

Table des Matières