Before first Use
Take the LED hand lamp and the accessories out of the packaging. Keep
packaging material out of reach of children. There is risk of suffocation!
Charge the lead-acid battery before using the hand lamp for the first time.
Inserting the Batteries
Unscrew the rear cap from the torch. The cap may be a little hard to unscrew
because of the gasket. Insert 3 Batteries LR20 (D) with the positive end first into
the housing. Only use batteries of the same type and capacity. Screw the rear
cap back on. Tighten it hand tight to ensure water tightness.
The torch can be immersed up to one meter deep in water for 30 minutes.
Operation
Press the on/off button to turn on the LED light. Press once more to reduce the
intensity of the light. Press for a third time to turn off the light.
Cleaning
Do not use aggressive chemicals or abrasives in order not to damage the
surfaces.
Technical Data
Rated Voltage
LED Rated Power
Degree of Protection
Protection Class
Dimensions
Lens Diameter
Weight (including battery)
Technical Data
7
4,5 V
10 W
IP 67
III
41 x 274 x 52.2 mm
Ø 52.5 mm
825 g