Using Instructions - NEO TOOLS 90-099 Traduction De La Notice D'origine

USING INSTRUCTIONS

Use and Working:
1. Check the heater to be sure it is not damaged.
2. Insert the plug in the socket
3. Turn the main switch on: the light will turn on and the heater is in standby mode
4. Now press the ON/OFF switch: the heater will start working. The display will show the room temperature.
5. Press the ON/OFF button first in order to switch the device off. The heater is now in standby mode. Now switch the main switch off (O); the
lamp will go out. Finally remove the plug from the socket.
Thermostat:
1. If you press the + or - key, the temperature setting will flash 5x on the display.
2. You can adjust the temperature setting by pressing the + or - key while it is flashing. With each key press, the temperature will be increased
(+) or decreased (-) by one degree.
3. The device will retain the temperature setting by switching itself on and off automatically.
Timer:
1. Briefly pressing once on the M button will switch the timer on. The red timer lamp will burn and the display will blink. You can set the time
when the heater is to switch itself off by pressing the + or - buttons: with each press it will go an hour forwards or backwards. The timer time
is set after 5x unchanged blinking. The display will now alternately show the room temperature (red lamp off) and the set number of hours
(red lamp burning). The display will then go off. The heater will switch itself off after the set number of hours.
2. The display will switch off if you change nothing in the settings for 10 seconds. You can reactivate it by pressing once on any button at
random.
WiFi and app operation:
1. The heater should be used within the range of the Wi-Fi router.
NOTE The Wi-Fi router should operate at 2.4 GHz
2. Download the "TuyaSmart" application on smartphone, tablet or computer.
3. After installing the application, select "transfer".
4. To register, enter the email address to which the verification code will be sent. The code must be applied to the application within 60 seconds
of receipt. Then create a password. Selecting "confirmation" completes the registration process in the application.
5. To add a new device, select "Add device".
6. Select "Small device" from the list and then "Thermostat".
After selecting the "Thermostat" option, the application will show information about the selected number of supported frequencies 2.4
GHz Wi-Fi Router, as well as a prompt to enter the Wi-Fi password if the control device is used before is not dependent on the range.
7. Connect the heater to the power supply.
8. Turn on the heater.
9. On the control panel, hold the "M" button, until the blue LED next to the Wi-Fi marking, will flash quickly. Then click "Next" in the application.
10. The application will show the options of "fast flashing" and "slow flashing". Select "fast flashing" or the application will search for the device
itself after a while.
11. After establishing the connection between the application and the device, the name of the device will appear in the application. Select
device selection, then the control panel will appear in the application.
12. The application is ready to control the radiator settings!
The "TuyaSmart" application allows the following settings:
− heating on and off (without operating the control panel power supply, which must be done manually using the main switch),
− thermostat temperature setting,
− timer setting,
− configuration of a weekly heating cycle.
You can control the heater remotely. If the radiator is within range of the paired Wi-Fi Router, the control application will work on the device with
Internet access.
Control buttons:
A. Up/Down button
B. Timer and WiFi button
C. ON/OFF switch
D. Blue WiFi light
E. Red Timer light
F. Display