Bosch CTL7 Serie Manuel D'utilisation page 57

The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
14.2 Overview Settings
See here for an overview of the "Settings".
Language
Home Connect
Time
Display settings
1
Depending on the appliance specifications
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
14 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
14.1 Changing settings
1.
a The display shows the list of set-
2.
a The appliance saves the setting
3.
4.
Tip: To call up brief information,
press ⁠ .
Home Connect assistant → "Setting up
Brightness
Night-time dimming
Select "Settings".
tings.
Change the required setting.
automatically.
To go back to the menu, press ⁠ .
To exit the settings, press
Set language.
Home Connect",
Page 55
Set the current time or
automatically display via
Home Connect.
Set the brightness in
steps.
Switch display dimming
on and off.
Basic settings en
⁠ .
57