Technical Data - Plamen Alberto Directives Techniques

Dear customers,
First of all, we would like to take this opportunity and thank you for choosing our product. The stove
you have purchased is your valuable property and that is why we would like to you to take a few minutes
and carefully study the following Instructions which will allow you to make the best of the product.
1 TECHNICAL DESCRIPTION AND DATA
Alberto is a product designed by following the latest trends and features simplicity of modern lines
easily adjustable to various spaces. The stove is made of gray cast and is enameled to give it a rich
tone.
The large glass door shows the complete firebox, resulting in a full sensation of open fire. The
specific primary and secondary air supply leaves the glass clear while the fire is burning.

TECHNICAL DATA:

MEASUREMENTS WxHxD:
WEIGHT:
NOMINAL OUTPUT:
PRODUCTION according to EN 13 240:
FLUE GAS DISCHARGE:
The firebox features a door
made in transparent ceramic glass
resistant to temperatures up to
700°C. This type of glass allows a
wonderful view of the fire while
preventing the appearance of
sparks and smoke at the same
time. The furnace is equipped with
a primary and secondary air
regulator that regulates the air
combustion, and therefore its
power as well.
Setting the air flow regulator
for 8,6 kW nominal power:
Primary / Secondary air flow regulator
The regulator regulates the air flow through the ash tray and roast grid in the fuel direction. The
primary air flow is necessary for the combustion process. The ash tray has to be cleaned regularly in
order to prevent the ash from forming obstacles for the primary airflow. The secondary air is supplied
to the back of the furnace by pulling the regulator.
63x82,9x44,1 cm
140 kg
8,6 kW
1a
Ø 150 mm
Image 2
20
Setting the air flow regulator for
firing and short time following:
Image 3