Matrix E30 Montage page 6

A Open HARDWARE FOR STEP 3.
3
B Attach the LINK ARM (9) to the HANDLEBAR
(8) using 1 BOLT (I). 1 NUT (J).
C Repeat steps on other side.
Hardware For Step 3
Description
I Bolt
J Nut
6
Qty
2
2
8
9
J
I
A Open HARDWARE FOR STEP 4.
4
B Connect the CABLES (1) to the CONSOLE
(13) and carefully tuck the excess
cable into the CONSOLE MAST (2).
C Attach the CONSOLE (13) to the
CONSOLE MAST (2) using 4 BOLTS (K).
D Attach PEDAL (14) to LINK ARM (9) using
4 SCREWS (L). Repeat on other side.*
L 14
E30 SHOWN
Hardware For Step 4
Description Qty
K Bolt 4
L Screw 8
Note: Be careful not to pinch any
wires while attaching the console.
13
1
2
K
E50
*
15
L
14
Attach PEDAL (14) to
LINK ARM (9) using 4
SCREWS (L). Snap PEDAL
INSERT (15) into pedal.
Repeat on other side.