PNI CT25PE Manuel Utilisateur page 9

the password. Click Next.
8. In the next interface, select the option EZ Mode from the
upper right corner.
9. Long press the key
pairing mode. Then, press the key ˄. The icon
blink on the screen.
10. Then check Confirm the indicator is blinking rapidly.
Click Next.
11. The application will start scanning nearby devices.
12. After you identify your device, you will receive the
Added Successfully confirmation.
13. To finish, click the Done button.
From the application, you can turn the thermostat on and
off, you can change the operation mode of the thermostat
(Manual, Eco, Auto) or you can set the weekly program.
from the thermostat to enter the
9
will