PNI CT25PE Manuel Utilisateur page 12

Scheduled mode
1. After setting the time and day of the week,
you will
the 4
It starts with setting the first day of the week and the
first period.
2. The start time* and temperature* will flash on the screen
in turn. Each time you press the key
will be confirmed and you will move to the next setting.
3. After setting the time and temperature for the first
period, it automatically switches to the second period,
then to the third and fourth.
4. This will continue with the setting of the 4 periods for
each day of the week (1 - 7).
*Note: The time can be changed from quarter to quarter of
an hour, and the temperature from half to half a degree. For
example, you can set the time to 07:15 or 07:30 or 07:45 and
the temperature to 22.0°C or 22.5°C or 23.0°C.
enter the
periods for
programming
each day
12
mode
of the
the selected value
of
week.