Mirolin BD44 Instructions D'installation page 8

STEP 17: Insert Plastic Plug (B8b) to cover screw
hole on the Door Stopper (B8a).
STEP 19:
Insert four Roller Brackets (B7b) on to Door
Panels (B3) and line up holes with Plastic Rings (B7e).
STEP 21: When assembling the Roller Brackets
(B7b), make sure the Wheel (B7d) is on the wider lip
side of the Bracket (B7b).
STEP 18: Prepare Glass Panels (B3) for installation.
Insert eight Plastic Rings (B7e) into the top holes of
glass panels.
STEP 20: Insert Machine Screws (B7c) into the
Roller Brackets (B7b) and tighten screws. (Do Not
over tighten).
STEP 22: Screw door Guiding Rollers (B7d) onto the
Roller Brackets (B7b) using the Roller Nut (B7a).
8