Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS
These enclosures have been constructed to make installation as easy as possible. Please read this booklet
completely prior to installing your new shower door.
BASIC TOOLS REQUIRED
"
Measuring tape with metric marking
"
Drill bit - ⅛" (3 mm)
"
Electric drill
"
Phillip's screwdriver # 2
"
Hammer
"
Pensil
STEP 1:
Remove the lid from box. Remove
packaging and
inspect all door components
thoroughly before installation. Check to ensure all
the hardware parts are in the package.
STEP 3: Place Plastic Jamb (B2) ¼" inside from
the edge of threshold.
"
Caulking Gun
"
Clear mildew resistant silicone tub caulking
"
Level (with vertical bubble)
"
Centre Punch or suitable alternative
"
Utility knife
"
Adjustable wrench
STEP 2: Mark Plastic Jamb (B2) to match holes
in the Wall Jamb (B1). Insert and line up Adjustment
Blocks (B11) with marked locations. Using
screwdriver, fix blocks in the marked location.
STEP 4:
Ensure the plastic Wall Jamb (B2)
is plumb with level.
5
Publicité
