Cleaning And Maintenance - Philips Double Contour Ladyshave HP6368 Mode D'emploi

EnglisH
10

cleaning and maintenance

Always switch off and unplug the appliance before you clean it.
Never switch on the appliance while you clean it or while the cutting
unit is not attached.
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
cleaning the shaving head
1 Press the on/off button to switch off the appliance (Fig. 9).
2 Pull the shaving head off the appliance (Fig. 6).
Do not exert pressure on the double shaving foil to avoid damage.
3 Push the cutting unit release slide to the right (1) and remove the
cutting unit (2) (Fig. 10).
4 Clean the cutting unit and the inside of the shaving head with the
cleaning brush. Also brush away any hairs that have collected under
the trimmer (Fig. 11).
Caution: Do not brush the foil to avoid damage to the brush or the foil.
5 You can also rinse the cutting unit and the shaving head under the
tap. To dry the cutting unit and the shaving head, shake them
irmly. (Fig. 12)
6 Place the cutting unit back onto the shaving head ('click') (Fig. 13).
Note: Make sure that the shaving head and the cutting unit are completely
dry before you reattach them onto the appliance.
maintenance
1 Lubricate the cutting unit (double shaving foil and trimmer) with a
drop of sewing machine oil twice a year (Fig. 14).
Let the appliance operate briely to spread the oil.
2