Operating Your Immersion Blender
8. When chopping is complete,
release the power button. Remove
the chopper attachment by
pressing both ejector buttons on
each side of the motor body.
Chopper Processing Guide
Food
Quantity
Preparation
Meats
200 g / 7 oz
Cut into 2 cm/
Almonds/Nuts
200 g / 7 oz
Place in Whole Nuts
Garlic
10–12 Cloves
Place in Whole Cloves
Onions
100 g / 3.5 oz
Cut into Quarters
Cheese
100 g / 3.5 oz
Cut into 1 cm/
Hard Boiled Eggs
2
Place in Whole Eggs
Carrots
200 g / 7 oz
Cut Average Carrot
into Quarters
Herbs
50 g / 2 oz
Remove Stalks
* Processing times and speeds are approximate. Actual usage may vary
depending on quality of food and desired chop size.
All manuals and user guides at all-guides.com
9. Unplug immediately after use,
before removing or changing
attachments.
Speed*
Time*
3
⁄
7–9
" Cubes
15 Seconds
4
5–7
25 Seconds
2–4
15 Seconds
2–4
15 Seconds
3
⁄
" Cubes
7–9
30 Seconds
8
7–9
3 Pulses
5–7
15 Seconds
7–9
15 Seconds
10
Operating Tips
• Cut solid foods into small pieces for
easier blending or chopping.
• To avoid splashing, insert the
Immersion Blender into the mixture
before pressing the power button,
and release the power button
before pulling the Immersion
Blender out of the mixture.
• When blending in a saucepan on a
cooking surface, remove the pan
from the heating element to
protect the Immersion Blender from
overheating.
• For best blending, hold the
Immersion Blender at an angle
and gently move up and down
within the container. Do not
pound down on the mixture with
the Immersion Blender.
Care and Cleaning
1. Unplug Immersion Blender
before cleaning.
2. Remove the adapters and
attachments by pressing both
ejector buttons on either side of
the motor body.
3. Wipe the motor body and
adapters with a damp cloth. Mild
dish soap may be used, but do
not use abrasive cleansers.
NOTE: Do not immerse the motor
body or the adapters in water.
Storage
The included drawstring storage bag
(Model 4KHB300 only) is designed
with three distinct compartments to
conveniently store the Immersion
• Be sure the extra long cord of the
Immersion Blender is not extending
over a hot heating element.
• Do not let the Immersion Blender sit
in a hot pan on the cooking surface
while not in use.
• Remove hard items, such as fruit
pits or bones, from the mixture
before blending or chopping to help
prevent damage to the blades.
• Do not use your Immersion Blender
to process coffee beans or hard
spices such as nutmegs. Processing
these foods could damage the
blades of the Immersion Blender.
• To prevent overflow, allow room in
the container for the mixture to rise
when using the Immersion Blender.
• Do not use the beaker or the chopper
bowl in the microwave oven.
4. Wipe power cord with warm,
sudsy cloth; then wipe clean with
damp cloth. Dry with soft cloth.
IMMERSION BLENDER
ACCESSORIES AND ATTACHMENTS
Wash blending attachment, beaker
and lid, whisk (Models 4KHB200 and
4KHB300 only), chopper bowl, blade,
and non-skid base (Model 4KHB300
only) in hot, soapy water, or in the
top rack of the dishwasher.
Dry thoroughly.
Blender motor body and cord, the
blending attachment, and the whisk
attachment. The durable, cotton twill
bag is machine washable.
11