Powerplay HOTROD HR233HB27ARNLQC Instructions De Montage, D'entretien Et D'utilisation page 8

Assembly Instructions
3
4
F
E
1
5
F
E
1
B
E
2
2
E
2
E
Pull back the collar on the QC fitting (B). Insert the male QC
connector on the hose (E) into female QC connector (B).
Push in until collar moves towards hose and is locked in
position.
Note: Never use pliers, will damage connectors.
Pull back the collar on the QC fitting on hose (E). Insert
the male QC connector on the spray gun (F) into hose (E).
Push in until collar moves towards gun and is locked in
position.
Note: Never use pliers, will damage connectors.
To remove the hose from the gun, pull back the collar on
the QC fitting on the hose (E), then pull away from the spray
gun (F), then release the collar.
8