Rice Lake Weighing Systems 682 Synergy Plus Manuel Technique page 59

4.5.8.1 Si Type = Gross, Net, Negative Gross, Negative Net, Positive Relative, Negative Relative, Percent Relative
User Setup
Stream Format Setpoint
Setpoint
Batching
Configuration
Setpoint 8 Setpoint 1
Alias Kind
If Preact =
On or Learn
Preact Value
Clear Tare
Batch
4.5.8.2 Si Type = Accumulate, Delay, Wait Standstill, Auto-Jog, Time Of Day
User Setup
Stream Format Setpoint
Setpoint
Batching
Configuration
Setpoint 8 Setpoint 1
Alias Kind
If Kind = Accumulate,
Delay or Wait Stanstill
Alarm
Digital Output
Illustration 4-22. Groupe A de paramètres de points de consigne
Tare
Digital I/O
Batching
Setpoint 2-8
Value
If Preact = Learn
Preact Stability
Preact Adjust (%)
(seconds)
Push Accumulate Push Print
If Batch = On
Branch Enable
Illustration 4-23. Groupe B de paramètres de points de consigne
Tare
Digital I/O
Batching
Setpoint 2-8
If Kind = Accumulate
or Delay
Value
Clear Accumulator Clear Tare
If Kind = Accumulate
or Time Of Day
Sense Batch
If Trip = Inband
or Outband
Trip Band Value
If Kind = Positive Relative,
Negative Relative or Percent Relative
Relative Setpoint
Preact Count
Number
Digital Output
Push Tare
Slot
Access Alias
If Kind = If Trip = Inband
Accumulate or Outband
Trip Band Value
Push Accumulate Push Print
If Batch = On, and If Kind =
Kind = Accumulate Accumulate
Branch Enable
© Rice Lake Weighing Systems ● Tous droits réservés
Configuration
If Trip = Higher
or Lower
Hysteresis Preact
Alarm Clear Accumulator
Based on Digital I/O
set as Output
Digital Output Sense
If Kind = Time Of Day
Time Duration
Digital Output
Push Tare
Slot
Access Alias
51