Tripp-Lite WEBCARDLX Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation
2 - Dynamic IP Address Assignment
2-1
Connect WEBCARDLX / WEBCARDLXE / WEBCARDLXMINI to Network:
Connect a standard Ethernet patch cable to your network using the RJ45
Ethernet port on your WEBCARDLX, WEBCARDLXE or WEBCARDLXMINI.
Note: This port does not support PoE (Power over Ethernet) applications.
The card will attempt to obtain an IP address via DHCP . This may take as long as
several minutes, depending on your network environment.
2-2
Determine IP Address: To identify the IP address assigned to the WEBCARDLX,
WEBCARDLXE or WEBCARDLXMINI, contact your network administrator and
provide the MAC address of the WEBCARDLX, WEBCARDLXE or WEBCARDLXMINI.
You can also determine the IP address locally at the card. If you do not already
have the serial over USB driver installed on your PC, you can download it from
tripplite.com/support by typing WEBCARDLX in the search field. Select the driver
named "TL-cdc". To install it, follow the instructions provided with the driver.
Once the driver is installed and the COM port has been assigned, start a
terminal emulation program, such as Tera Term Pro. Configure it to use the
assigned COM port and use the following serial port settings: 115.2Kbps, 8,
NONE, 1. Connect the USB cable to the PC and the Micro-USB end to the
Micro-USB port on the WEBCARDLX, WEBCARDLXE or WEBCARDLXMINI. When
the login prompt appears, login as localadmin / localadmin. When the Menu
appears, navigate to "3- Network Configuration", then to "1- IP Configuration".
The assigned IP address will be displayed. After you have determined the IP
address, proceed to 4 - Test and Configure.
Note: You may wish to request a long-term lease period for the IP address, depending on
your application.
®
Note: PowerAlert
WEBCARDLXMINI support both IPv4 and IPv6. The card is set up by default to receive a
DHCP address for IPv4, IPv6 or both. Receiving both addresses allows connection to the
card via either the IPv4 or IPv6 address.
Device Manager and the WEBCARDLX, WEBCARDLXE or
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

WebcardlxeWebcardlxminiAg-040aAg-06e5

Table des Matières