Preparation - Tripp-Lite WEBCARDLX Mode D'emploi

Installation
Warning: When handling the WEBCARDLX, WEBCARDLXE or WEBCARDLXMINI, follow
standard ESD (electrostatic discharge) precautions to avoid damaging the card. For
your safety, you should also read the documentation that came with your UPS system
or PDU to familiarize yourself with precautions against electric shock.

1 - Preparation

1-1
Confirm Package Contents: In addition to this manual, your package should
include the accessory card in an anti-static bag, a cable (73156A), a MAC
address label and several faceplates. If anything is missing, contact your supplier
immediately. Additional documentation and two Management Information Base
(MIB) files (Tripplite.mib and RFC1628.mib) for use with Network Management
Systems (not otherwise required) can be found by going to tripplite.com/support
and typing WEBCARDLX in the search field.
1-2
Install UPS: Install your UPS system and turn it on before installing the WEBCARDLX,
WEBCARDLXE or WEBCARDLXMINI. Ensure that the accessory card slot is accessible.
1-3
Locate the WEBCARDLX / WEBCARDLXE / WEBCARDLXMINI MAC Address:
The 12-digit MAC address (in the format XX XX XX XX XX XX) is printed in two
locations: a label attached to the underside of the card and a duplicate label
inside the box. Attach the duplicate label to the UPS system or keep it in a
secure location for easy reference.
1-4
Insert WEBCARDLX / WEBCARDLXE / WEBCARDLXMINI in Accessory Slot:
Use a screwdriver to remove the accessory slot cover from the UPS. While the
UPS is turned on, align the WEBCARDLX, WEBCARDLXE or WEBCARDLXMINI with
the guides in the accessory slot and push the card into the slot until the card is
fully seated. Align and attach the faceplate that matches your UPS using the
screws you removed to take off the accessory slot cover. The ports should be
nearly flush with the face of the UPS.
1-5
Address Assignment: If your network's DHCP server will assign an IP address to the
WEBCARDLX, WEBCARDLXE or WEBCARDLXMINI, proceed to 2 - Dynamic IP
Address Assignment. If you will assign a static IP address to the card, proceed to
3 - Static IP Address Assignment. If you are uncertain which method to use, contact
your network administrator for assistance before continuing the installation process.
4