Publicité
Step 18
To insert the drawer into your unit, tip the front of the
å
drawer down and drop the rollers on the drawer behind
the rollers on the unit. Lift the front of the drawer up and
slide it into the unit.
Insert the METAL PINS (EE) into the hole locations of
å
your choice in the ENDS (A and B). Set the ADJUSTABLE
SHELVES (G2) onto the METAL PINS so the SHELF SNAPS
are resting on the METAL PINS. Push on the SHELF until
each METAL PIN "snaps" into the SHELF SNAP.
NOTE: If you wish to change the location of the SHELVES,
å
tap the SHELF up with the palm of your hand.
Peel the FELT DISC from the FELT DISC CARD (1M) and
å
stick them on the ADJUSTABLE SHELVES (G2) where
they come into contact with the DOORS.
www.sauder.com/services
(8 used)
EE
G2
B
G2
1M
410420
Almost time to
celebrate! With a nap.
A
Page 23
Publicité
