Sauder Shoal Creek Serie Instructions D'assemblage page 13

Step 8
Turn four BLACK 9/16" FLAT HEAD SCREWS (QQ) into
å
the ENDS (A and B) until the shoulder of the SCREWS
rest on the surface of the ENDS.
Slide the END MOLDINGS (P) onto the ENDS (A and B).
å
Line up the groove in the MOLDINGS over the head of the
SCREWS in the ENDS.
P
BLACK 9/16" FLAT HEAD SCREW
(4 used in this step)
www.sauder.com/services
B
P
QQ
A
Shoulder
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
410420 Page 13