Aficio SP 3400SF Guide page 14

Using the Scanner Function
"
Loading...
"
Ready Mono To USB Memory
" " or "
Color
chine's scanning mode.
1
C
Place the original on the exposure glass or in the ADF.
If necessary, configure advanced scan settings.
D
Press the {Start} key.
Depending on the machine's setting, you will see "
" (black-and-white scanning mode) or "
[2]PDF
" (color or grayscale scanning mode) on the display.
[2]PDF
E
Press {1} or {2} according to the desired file format.
Depending on the machine's settings, you may see "
" on the display when scanning from the exposure glass.
[2]No
If you see this message, proceed to step
F
If you have more originals to scan, place the next original on the exposure
glass, and then press {1}. Repeat this step until all originals are scanned.
G
When all originals have been scanned, press {2} to start sending the
scanned file.
H
Confirm that "Ready" appears on the display.
The scanned file is created in the root directory of the USB flash disk.
I
Remove the USB flash disk from the machine.
Reference
For complete information about the scanner function, see User Guide
Scanning from a Computer
Scanning from a computer (TWAIN
scanning) allows you to operate the
machine from your computer and
scan originals into your computer di-
rectly.
TWAIN scanning is available with
both USB and network connections.
A-10
" appears on the display. Wait until the display changes to show
" (the duration depends on your USB flash disk).
" may appear instead of "
GrayScale
", depending on the ma-
Mono
File Format? [1]TIFF
File Format? [1]JPG
Next Scan? [1]Yes
F
. If not, proceed to step
Basic Operation for TWAIN Scanning
TWAIN scanning is possible if your
computer is running a TWAIN-compat-
ible application. PageManager, which is
provided on the driver CD-ROM, can be
used for TWAIN scanning.
Reference
For details about the TWAIN scan-
ning operation, see "Scanning from
a Computer", User Guide
TWAIN driver Help.
H
.
.
and