Electrolux Create 4 Mode D'emploi page 9

damaged. The appliance must only be connected to an earthed socket.
GB
If necessary an extension cable suitable for 10 A can be used. If the
HR
appliance or the supply cord is damaged, it must be replaced by the
CZ
manufacturer, its service agent or similarly qualified person, in order to
avoid hazard.
DK
EE
Always place the appliance on a flat, level surface.
FI
Never leave the appliance unattended while connected to the supply mains.
FR
The appliance must be switched off and the mains plug withdrawn each time
DE
after use, before cleaning and maintenance.
HU
The appliance and accessories become hot during operation. Use only
IT
designated handles and knobs. Allow to cool down before or storage.
LV
The mains cable must not come into contact with any hot parts of the
appliance.
LT
NO
Do not immerse the appliance in water or any other liquid. Do not exceed
the maximum filling volume as indicated on the appliances. Do not use or
PL
place the appliance on a hot surface or near source of heat.
RO
This appliance is intended to be used in household and similar applications
RU
such as:
SR
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
SK
– by clients in hotels, motels and other residential type environments;
SI
– bed and breakfast type environments.
SE
The coffee maker shall not be placed in a cabinet when in use.
TR
No action is needed to adapt the product to 50 or 60Hz.
UA
The product will adjust itself.