AENO TB1 Mode D'emploi page 13

EN AENO TB1 electric blender is designed for chopping food, making
smoothies, purees, drinks and other products.
Specifications
Supply voltage: 220–240 V (AC); Frequency: 50/60 Hz. Power: 800.0 W. Bowl
Capacity: 1.75 L. Measuring cup capacity: 80 ml. Dimensions (L×W×H): 230 mm
× 200 mm × 420 mm. Weight: 4.7 kg. Power cord length: 1 m.
Package Contents
AENO TB1 blender, measuring cup, brush, steaming container, quick start
guide, warranty card.
Limitations and Warnings
Children and persons with disabilities may use the device only under the
supervision of adults experienced in its use. Keep the device out of the reach of
children. During the operation of the device the surface of its bowl heats up.
Do not touch it. Do not touch the device housing while it is operating. Do not
disassemble or repair the blender on your own. Do not wash the bowl base with
the electrical contacts and the clutch shaft with water. Place the blender only
on a firm and stable surface. The distance from the operating device to other
objects should be at least 15 centimeters. Do not store the blender cup in the
refrigerator: short circuit of electrical contacts may occur due to condensation.
Do not touch the blender blade. WARNING! The min product level in the
blender is 750ml. Do not exceed the max level for hot liquids (1200ml) and
cold liquids (1500ml), it may cause overflow. Do not open the lid of the
blender cup while the blender is in operation. If you hear an intermittent sound
of the blade turning when chopping food, this is normal. If you lift the bowl or
open the lid of the blender while it is running, the protection will be triggered,
and the motor will stop. Do not add sugar, plant stems or legumes (beans, peas,
chickpeas, lentils) to the bowl, as the blade can jam, and it can cause damage
aeno.com/documents 13