Installing The Digital Camera; Open The Case; Load The Digital Camera - Olympus PT-EP11 Mode D'emploi

3. Installing the digital camera

Open the Case

1 Slide and hold the slide lock towards the arrow direction (1) and turn the open/close dial clockwise
(2).
2 Open the rear lid of the Case gently.
Slide lock
CAUTION:
Do not exert too much force while turning the open/close dial. Doing so may damage the dial.

Load the digital camera

1 Raise the ON/OFF lever.
2 Confirm that the digital camera is OFF.
3 Gently insert the digital camera into the Case.
4 Insert a silica gel bag (1g) between the bottom of the digital camera and the Case.
The silica gel bag provided for prevention of fogging.
EN
CAUTION:
• The silica gel bag will be caught when the Case is sealed and water leakage will occur.
• Once silica gel has been used, the moisture absorption performance will be impaired. Always replace the
silica gel when the Case is opened and closed.
EN 13
1
2
3
4