Samsung HT-D450K Guide De L'utilisateur page 36

Basic Functions
Listening to Radio
Using buttons on the Remote Control
1.
Press the FUNCTION button to select FM.
2.
Tune in to the desired station.
Preset Tuning 1 : You must first add a
~
desired frequency as a preset. Press the
STOP (@) button to select PRESET and
then press the TUNING/CH(
select the preset station.
Manual Tuning : Press the STOP (@) button
~
to select MANUAL and then press the
TUNING/CH
( ) button to tune in to a lower or higher
frequency.
Automatic Tuning : Press the STOP (@)
~
button to select MANUAL and then press
and hold the TUNING/CH(
automatically search the band.
Setting Mono/Stereo
Press the MO/ST button.
Each time the button is pressed, the
~
sound switches between STEREO and
MONO.
In a poor reception area, select MONO for a clear,
~
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM.
2. Press the TUNING/CH (
<89.10>.
3.
Press the TUNER MEMORY button.
~ Number flashes on the display.
4. Press the buttons to select
preset number.
You can select between 1 and 15 presets.
~

English
5. Press the TUNER MEMORY button again.
~
~
6. To preset another station, repeat steps 2 to 5.
~
) button to
) button to
) button to select
Press the TUNER MEMORY button before
number disappears from the display.
Number disappears from the display and the
station is stored in memory.
To tune in to a preset station, press the
TUNING/CH ( ) buttons on the remote
control to select a channel.