Bimar RTY-30 Notice D'instructions page 11

1. Speed Knob
2. Timer Knob
 Plug it in.
 The appliance has a timer for automatic switching off at the end of the time set;
to set the time turn the timer knob (2) clockwise to the position corresponding
to the desired operating time (0-120 min.); in order to operate the appliance in
a continuous manner, and to therefore exclude use of the timer, turn the knob
anticlockwise to the "ON" position
Ventilation
- set the speed using the knob, turn the selector knob (1) to the
position corresponding to the desired power setting "1-2-3", (see
a ref. picture on the side)
1= Speed minimum 2 = Speed medium 3 = Speed maximum
- set the speed and rotation of the front grid turn the knob clockwise
to the position corresponding to the desired power setting "1-2-
3", of these positions "
1= Speed minimum 2 = Speed medium 3 = Speed maximum
To switch off the appliance, turn the selector knob to the "0" position and turn the
timer knob to the "OFF" position, and then remove the plug from the socket.
When not in use for long periods, the plug must always be removed from the
socket.
" , (see a ref. picture on the side)
11