Breville the Smart Oven Air Fry BOV860 Manuel D'instructions page 23

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

POSSIBLE PROBLEM
The 'preheat' alert sounds
at a lower temperature
than what is displayed
on the LCD screen
The LCD screen
displays 'E01'
The LCD screen
displays 'E02'
The LCD screen
displays 'E03'
The LCD screen
displays 'E05'
EASY SOLUTION
The 'preheat' alert sounds at 75% of the target temperature. This provides
the fastest, combined preheating and cooking time.
This is because when the 'preheating' alert sounds, signaling the user to
open the oven door and insert food, there is dramatic temperature loss
inside the oven. If the alert sounded at 100% of the target temperature,
opening the door would mean a lot of this waiting time is "wasted". We
have calculated that by sounding the alert at 75% of the target temperature,
followed by the oven door being opened to place food inside the oven, that
we still recover to the target temperature up to 2 minutes faster. This is why
the temperature on the LCD screen does not match the target temperature
at the 'preheat' alert. Depending on the set temperature, it can take the oven
approximately 8–10 minutes from start-up, including opening the oven
door when the 'preheat' alert sounds, to reach the target temperature.
The LCD screen will display 'E01' when there is a non-resettable issue with
the appliance. Should this occur, immediately remove the power cord from
the power outlet and call Breville Consumer Support.
The LCD screen will display 'E02' when there is a non-resettable issue with
the appliance. Should this occur, immediately remove the power cord from
the power outlet and call Breville Consumer Support.
The LCD screen will display 'E03' if the oven temperature is above the set
maximum limit. Remove the plug from the power outlet, allow the oven to
cool for 15 minutes, then plug back in.
Call Breville Consumer Support if the 'E03' message continues.
The LCD screen will display 'E05' when there is a non-resettable issue with
the appliance. Should this occur, immediately remove the power cord from
the power outlet and call Breville Consumer Support.
23

Publicité

Table des Matières
loading

Table des Matières