General operation
1.
Press the ON/OFF button on the control panel to turn the power on. The
appliance automatically switches to standby mode.
2. Press the ON/OFF button on the control panel again to activate the
appliance. The unit is automatically in FM radio mode.
3. If the unit is not in radio mode, press the MODE button repeatedly until
the display shows the desired mode:
Mode
FM Radio
CD
USB
SD
BT
Record player
Search radio stations
Note: The built-in station memory can store up to 20 stations. However,
the frequency of the station is not displayed, only the memory location
of the station.
•
When you use the radio for the first time, press the ON/OFF button on
the control panel to turn on the unit. The unit will automatically go into
standby mode.
•
Press the ON/OFF button on the control panel again to activate the unit.
The unit is automatically in FM radio mode. If the unit is not in radio
mode, press the MODE button repeatedly and select FM mode. The
display will show [P00] and a signal will sound from the speakers.
Display
EN
29